Skip To Content

Catalog

Request Information
To meet the demands for the safe reduction of inlet pressures up to 10,000 psig, GO Regulator has designed the PR-57 Series regulator. This precision regulator features a piston sensing design which provides the operator with low adjusting torque requirements when setting the outlet pressure. The body is constructed from 316L stainless steel, providing the ultimate in safety and corrosion resistance.

The optional self-relieving feature provides an additional level in operational ease, as it allows for trapped downstream pressure to be safely vented to atmosphere through the bonnet.
Unit of Measure

Specifications

Brands

 N/A GO Regulator, Inc.

Operating Temperature

 N/A -40 to +150 ºF-40 to +66 ºC

Body Material

 N/A 316L Stainless Steel

Port Configuration

 N/A F - See Diagram for Port Configuration

Process Port Size

 N/A 1/4 in

Process Port Types

 N/A Female National Pipe Tapered (FNPT)

Gauge Port Size

 N/A 1/4 in

Gauge Port Types

 N/A Female National Pipe Tapered (FNPT)

Surface Finish of Diaphragm Cavity

 N/A < 25 Ra

Seat Material

 N/A Polyetheretherketone (PEEK™)

Flow Coefficient (Cv)

 N/A 0.05

Outlet Range

 N/A 0 to 750 psig

Piston Type

 N/A Non-Self-Relieving

Piston Material

 N/A Stainless Steel/Polytetrafluoroethylene (PTFE) Cavity O-Ring

Cap Assembly

 N/A Panel Mount, Aluminum

Weight

 N/A 4.4 lb2.0 kg

Filter

 N/A 20 µm

Features and Specifications

Features and Specifications

 N/A
  • Gas or liquid service
  • 316L stainless steel construction
  • Better than 25 Ra finish in diaphragm cavity
  • Stainless steel spring loaded piston sensor
  • Bubble-tight shutoff
  • Fluorocarbon (FKM) seals (other elastomers optional)
  • Inlet pressure maximum 10,000
  • Outlet pressure ranges are 0-250, 0-500, 0-750, 0-1000, 0-2000, 0-4000, 0-6000, 0-7500 and 0-10,000 psig
  • 1/4" FNPT standard

Options

Options

 N/A
  • Gauges and CGA fittings for cylinder gas application
  • Self-relieving and captured vent
  • 3/8" FNPT

Note

Note

 N/A Contact the factory for any additional requirements.

Polyetheretherketone™ (PEEK™) is a trademark of Victrex PLC.

Back to Top