Print Back
2-way Integral Panel Mount Ball Valves
Used for quick on-off service with a visual indication of flow, HOKE’s 2-way ball valves offer orifice sizes up to 0.25” (6.4mm). Flomite valves feature a floating ball design, encapsulated replaceable seats and check seals to ensure leak-tight service and extended service life.

Typical Applications
  • Instrument panels
  • High pressure instrument lines
  • Gas sampling in pilot plants
  • Full flow and shutoff in chromatographs
  • Hydraulic test stands
  • Gas sampling cylinders
  • Handling corrosive and viscous fluids
  • Unit of Measure

    Specifications

    Connections - Inlet

    N/A 1/4" NPT Male

    Connections - Outlet

    N/A 1/4" NPT Female

    Body Material

    N/A Brass

    Operating Pressure Range

    N/A 1500 psig at 70° F (103 bar at 21° C)

    Operating Temperature Range

    N/A -40 to +350 ºF-40 to +176 ºC

    Orifice

    N/A 0.25 in6.40 mm

    Cv

    N/A 1.40

    C

    N/A 1.75 in45 mm

    E

    N/A 2 17/32 in64 mm

    H

    N/A 1/2 in13 mm

    H1

    N/A 7/16 in11 mm

    Panel Hole

    N/A 49/64 in19 mm

    Panel Thickness

    N/A 1/4 in6.0 mm

    Features & Benefits

    N/A
  • Quarter turn handle provides a visual indication of on/off valve position, improving safety.
  • Dual encapsulated TFE seats and microfi nished ball ensure a leak tight seal. This combination provides greater valve reliability.
  • Dyna-Pak packing provides a leak-tight seal with low operating torque in vacuum or high pressure applications, helping to prevent fugitive emissions.
  • Floating ball provides pressure-assisted sealing and temperature wear compensation for longer valve cycle life and greater value.
  • A wide variety of Hoke Gyrolok end fittings or pipe fittings provide the correct fi tting option for the application.
  • Special High Tolerance NPT Thread