Skip To Content

Catalog

Request Information
  • Compact size valve built for maximum durability and robust performance in the toughest applications
  • 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
  • Soft tip valves feature a patented Acetal non-rotating soft tip stem, and a back-up metal-to-metal seal (U.S. Patent 6,820,857)
Unit of Measure

Specifications

Type

 N/A Needle Valve

Series

 N/A 150

Connection Size

 N/A 1/4 in

Valve Type

 N/A Female-Female Angle

Valve Material

 N/A Steel

Material

 N/A Zinc-Nickel Plated Steel

Stem Seal and Type

 N/A All 316 Stainless Steel stems with Fluorocarbon (FKM) o-ring and Polytetrafluoroethylene (PTFE) back-up ring below the threads, Polytetrafluoroethylene (PTFE) packing optional

Pressure Ratings at 200 Degree Fahrenheit (ºF) Temperature

 N/A 6,000 psi

Orifice Size

 N/A 0.172 in

Cv Coefficient

 N/A 0.42

Seat

 N/A Hard Seat

Handle Material

 N/A Steel

Optional Handle Material

 N/A Steel

Warranty

 N/A 3 y

Connection Type

 N/A National Pipe Thread (NPT)

Weight

 N/A 0.5 lb

Additional Options

Additional Options

 N/A
  • Stem Tips
    • PCTFE (T3)
    • PEEK (T4)
    • Regulating Acetal (T10)
    • Regulating PCTFE (T11)
    • Regulating PEEK (T12)
  • O-Rings
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer) 3018 or equivalent) (KZ1)
    • NBR (NB1)
  • Panel Mountings
    • Panel Mount (2 Nuts) (PM2)

Prop 65 Warnings

Prop 65 Warnings

 N/A
WARNING: This product can expose you to chemicals including Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Limitations Which Apply Are

Limitations Which Apply Are

 N/A These units must be operated within the catalogued environmental and application parameters. Determination of failure will be made by NOSHOK, Inc.'s equipment and personnel or a certified test facility specializing in this type of evaluation.

In keeping with and for purposes of product and/or manufacturing process improvements, NOSHOK, Inc. reserves the right to make design changes without prior notice.

Additional Information

Additional Information

 N/A
  • FKM o-ring seal and PTFE back-up ring below the stem threads to protect from corrosion and galling; PTFE packing optional
  • All stem threads are rolled for strength and ease of operation
  • Patented body-to-bonnet, metal-to-metal seal is designed to significantly increase the pressure range of the valve (U.S. Patent 7,758,014)

Options and Accessories

Installed Options and Accessories

 N/A
  • Packing
    • PTFE (P1)
  • Stem Tips
    • PCTFE (T3)
    • PEEK (T4)
    • Regulating Acetal (T10)
    • Regulating PCTFE (T11)
    • Regulating PEEK (T12)
  • O-Rings (Other o-ring materials available on request)
    • EPDM (EM1)
    • FFKM (Perfluoroelastomer) 3018 or equivalent (KZ1)
    • NBR (NB1)
  • Panel Mount
    • 1 nut (PM1)
    • 2 nuts (PM2)
  • Handles
    • 1" Round Knurled Handle (HL3)
  • Cleaning For Oxygen Service (Stainless Steel & Brass Only)

Assembly Options

 N/A NOSHOK offers multiple assembly options to meet your specific system requirements. Consult factory to discuss your customized solution.

Note

Note

 N/A All NOSHOK valve products conform to the MSS SP-99 instrument valves standards, and valves supplied with packing also conform to MSS SP-132 compression packing systems for instrument valves standard.

Please note that the standard o-ring in all the NOSHOK mini valves is FKM and the standard handles are brass round knurled handles (HL3), steel 1-3/8" mini "T" handles (HL7), and 316SS 1-3/8" mini "T" handles (HL7)

The handle material will always match the material of the valve, unless otherwise specified. For example, the round knurled handles (HL3) on a 152-FFB will be brass. When only the standard configuration is needed, no additional designations are necessary. Please consult the factory for special application requests.

O-Ring - Other o-ring materials available on request.

Back to Top