Skip To Content

Catalog

The MR is an ultra-miniature pressure regulator that has many of the same features found in the time-tested design of the CPR-1 & PR-1 Series pressure Regulator. Designed for surface, panel or manifold mounting, the MR offers the utmost in versatility to the systems designer. It’s low internal volume of less than 2.7cc makes the MR the perfect choice for systems that require rapid purge cycles. Standard features permit using this regulator in a wide variety of services, including corrosive fluids. The MR can be tailored to virtually any application by utilizing the optional features. All of this is attainable while achieving as low as 0.2% accuracy during supply pressure fluctuations.

This regulator is designed to allow the construction of compact and sophisticated analytical instrumentation where the optimum in pressure control is required and space is at a premium.
Unit of Measure

Specifications

Brands

N/A GO Regulator, Inc.

Internal Volume

N/A < 2.7 cm³

Inlet Filter

N/A 20 µm

Body Material

N/A 316L Stainless Steel

Port Configuration

N/A 1

Port Types

N/A Surface Mount

Surface Finish of Diaphragm Cavity

N/A < 25 Ra

Seat Material

N/A Polychlorotrifluoroethylene (PCTFE) (Formerly Kel-F® 81)

Flow Coefficient (Cv)

N/A 0.025

Outlet Range

N/A 0 to 250 psig (Requires T-handle or Tamper-Proof)

Diaphragm Type

N/A Standard, Nylon Diameter Slip Ring (170 °F Maximum Temperature)

Diaphragm Facing Material

N/A Tefzel® Ring

Diaphragm Backing Material

N/A Stainless Steel

Diaphragm O-Ring Material

N/A Polytetrafluoroethylene (PTFE)

Cap Assembly

N/A T-Handle

Note

N/A Contact the factory for any additional requirements.

Features and Specifications

Features and Specifications

N/A
  • Gas or liquid service
  • 316L stainless steel construction
  • Internal volume is less than 2.7cc
  • 20 micron inlet filter
  • Bubble-tight shutoff
  • Outlet pressure ranges are 0 - 10, 0 - 25, 0 - 50, 0 - 100, 0 - 250 and 0 - 500 psig
  • Cv flow coefficient 0.025 or 0.06
  • Option: surface mount (for manifolds)
  • Optional INCONEL® diaphragm

Back to Top