Print Back
Techniserv, Inc. is proud to offer the TECHNI-PURE VH series Bioreactor and Fermentor exhaust vent heaters to meet the demands of the pharmaceutical and biotech industries. Heating the exhaust gas raises its dew point, minimizing the potential for condensate blocking of the sterile vent filter. The exhaust vent heater provides a degree of foam removal from the gas stream. It also aids during system sterilization, helping maintain clean steam temperature on the path out through the sterile vent filter. With this offering we strive to maintain the consistency of quality, fit, and finish that our customers have come to expect from Techniserv, Inc. products.
Unit of Measure

Specifications

Brands

N/A TECHNI-PURE

Inlet/Outlet A

N/A 1 in

Dimension B

N/A 13-5/8 in

Dimension C

N/A 8-7/8 in

Dimension D

N/A 6-7/16 in

Dimension E

N/A 2 in

Dimension F

N/A 1/2 in

Dimension G

N/A 1/4 in

Minimum Gas Flow

N/A 100 slpm

Maximum Gas Flow

N/A 250 slpm

Materials of Construction

N/A 316L Stainless Steel

Features and Benefits

Features and Benefits

N/A
  • 15 Ra EP product contact internals
  • 35 Ra externals
  • ASME BPE standard Tri-Clamp connections on tube side connections
  • ANSI flange or ASME BPE standard Tri-Clamp connections on shell
  • Simple tube in tube design, fully drainable
  • CIP/SIP-able in place
  • COP-able and easy removal of the inner baffle, if heater is fouled by broth components
  • Pressure drop similar to comparable tube size/length (≤ 0.2 psid at maximum flow at 5 psig inlet)
  • Design features to maximize gas turbulence in inner tube and steam turbulence in shell
  • Standard sizes ranging from 1" through 3"
  • Custom sizes available through 4"
  • GMP Documentation package available with each agitator including:
    • Material Cert's
    • Weld documentation
    • Passivation and Surface Finish Cert's
    • Assembly Drawing with BOM

Note

Note

N/A Each Scal-Tech Gas Heater is designed to operate with 20 PSIG steam at 5 lb/hr steam flow rates. The effective temperature rise through the heater will be a minimum of 5ºC (9ºF) ΔT at 5 PSIG inlet pressure, at the maximum flow rates.