Skip To Content

Catalog

Request Information
2-way Integral Panel Mount Ball Valves
Used for quick on-off service with a visual indication of flow, HOKE’s 2-way ball valves offer orifice sizes up to 0.25” (6.4mm). Flomite valves feature a floating ball design, encapsulated replaceable seats and check seals to ensure leak-tight service and extended service life.

Typical Applications
  • Instrument panels
  • High pressure instrument lines
  • Gas sampling in pilot plants
  • Full flow and shutoff in chromatographs
  • Hydraulic test stands
  • Gas sampling cylinders
  • Handling corrosive and viscous fluids
    • Unit of Measure

    Connections - Inlet

    		 N/A 1/8" NPT Female

    Connections - Outlet

    		 N/A 1/8" NPT Female

    Body Material

    		 N/A 316 Stainless Steel

    Operating Pressure Range

    		 N/A 6000 psig at 70° F (414 bar at 21° C)

    Operating Temperature Range

    		 N/A 0 to +300 ºF-18 to +149 ºC

    Orifice

    		 N/A 0.125 in3.20 mm

    Cv

    		 N/A 0.40

    C

    		 N/A 1 9/32 in33.0 mm

    E

    		 N/A 1 31/32 in50 mm

    H

    		 N/A 13/32 in10 mm

    H1

    		 N/A 11/32 in9 mm

    Panel Hole

    		 N/A 19/32 in15 mm

    Panel Thickness

    		 N/A 3/16 in5 mm

    Features & Benefits

    		 N/A
  • Quarter turn handle provides a visual indication of on/off valve position, improving safety.
  • Dual encapsulated TFE seats and microfi nished ball ensure a leak tight seal. This combination provides greater valve reliability.
  • Dyna-Pak packing provides a leak-tight seal with low operating torque in vacuum or high pressure applications, helping to prevent fugitive emissions.
  • Floating ball provides pressure-assisted sealing and temperature wear compensation for longer valve cycle life and greater value.
  • A wide variety of Hoke Gyrolok end fittings or pipe fittings provide the correct fi tting option for the application.
  • Special High Tolerance NPT Thread
    •

    Back to Top