Del Val Controls, Inc.
Del Val Controls, Inc.
Mailing Address:
P.O. Box 3091
West Chester, PA 19381
Location:
640 Snyder Ave. Unit E
West Chester, PA 19382
Phone: 888-584-0191
Fax: 610-431-4339
E-Mail: sales@delvalcontrols.com
Website: www.delvalcontrols.com
Print Back
Techniserv, Inc. is proud to offer the TECHNI-PURE SV Series Clamp Mount Sanitary Sample and Vent Valve product line to meet the demands of the pharmaceutical and biotech industries. With this offering we strive to maintain the consistency of quality, fit and finish that our customers have come to expect from Techniserv, Inc. products.
Unit of Measure

Specifications

Brands

 N/A TECHNI-PURE

Valve Body Material

 N/A 316L Stainless Steel

Valve Plug Material

 N/A 316L Stainless Steel

Seat Seal Material

 N/A Ethylene Propylene Diene Terpolymer (EPDM) Fluorocarbon (FKM) Polytetrafluoroethylene (PTFE) Silicone USP Class VI

Valve Plug Seal Material

 N/A Ethylene Propylene Diene Terpolymer (EPDM) Fluorocarbon (FKM) Silicone USP Class VI

Knob Material

 N/A Polypropylene (Technopolymer)

Set Screw Material

 N/A 18-8 Stainless Steel

Snap Ring Material

 N/A 15-7 PH Stainless Steel

Finish - Wetted Surfaces

 N/A 15Ra uin Max. Electropolished and Passivated 20Ra uin Max. Mechanically Polished and Passivated

Finish - External Surfaces

 N/A 32Ra uin Max. Mechanically Polished

Maximum Operating Pressure at 25 Degree Celsius (ºC) (77 Degree Fahrenheit (ºF) Temperature

 N/A 10 bar145 psig

Maximum Operating Pressure at 134 Degree Celsius (ºC) 273 Degree Fahrenheit (ºF) Temperature (Elastomer Rating)

 N/A 2.1 bar30 psig

Body Styles

Body Styles

 N/A Four 90º angled outlet body styles are available, as follows:
  • 3/4" TC Concentric Inlet
  • 1" TC Eccentric Inlet
  • 1" and 1-1/2" TC Concentric Inlet
  • 1/1/2" TC Eccentric Inlet
Eccentric bodies are designed to be attached to a horizontal process tube providing a low point drain tangent to the ID of the TC gasket. Concentric bodies are designed for use in instances where the valve is attached to a process TC facing up or down.

Outlet Connections

Outlet Connections

 N/A Hose Barb, OD Tube End and 1/2" TC. Hose Barb and OD Tube End are available in 1/4", 3/8" and 1/2" sizes.

Spare Parts

Spare Parts

 N/A Once TECHNI-PURE SV sample valves are in service, over a period of time it will be necessary to replace the elastomers and possibly some other components. Techniserv offers a rebuild kit that provides all of the wearing and elastomeric parts that would normally be needed to restore a valve back to optimum condition. All that is required to order the correct kit part number is the "O-Ring Material" and "Valve Seat" codes from the valve model number to be rebuilt.

The Rebuild Kit part number has the form: TS-SV-K (O-Ring Material Code)(Valve Seat Code).

For example, the Rebuild Kit for the sample valve defined by the config-urator on the previous page of this brochure would be: TS-SV-KSP

If the valve body or the valve plug need to be replaced, you will need to contact Techniserv for price and delivery of these items.

Features and Benefits

Features and Benefits

 N/A
  • TC Mount in 3/4", 1" and 1-1/2" sizes with 90º angled outlet
  • Concentric or Eccentric inlet connections to assure drain-ability
  • Tube end, hose barb or 1/2" TC outlet connections available
  • 316L-SS provided for all product wetted metal parts
  • All elastomers are of Class VI material
  • Two seat seal methods available: PTFE face seal or o-ring (soft) seal
  • Flush (0.020") seal to process
  • Materials compatible with Autoclaving
  • Technopolymer operating knob to reduce operator hazard
  • Each valve etched with Model, Tag No. and Serial No.
  • GMP Documentation package available with each valve including:
    • Order Processing Sheet
    • Material Cert's
    • Elastomer C of C's
    • Passivation and Surface Finish Cert's
    • Assembly Drawing with BOM